Home Auto Repair How to Install Rear Bumper Applique on 2019 Acura MDX

How to Install Rear Bumper Applique on 2019 Acura MDX

85

Download 2019 Acura MDX Rear Bumper Applique Installation Instructions – 1. Open the tailgate. Using the alcohol swab, clean the rear bumper where the rear bumper applique will attach. 2. Attach a strip of masking tape to the rear bumper as area shown. Using a felt-tip pen, make a mark on the masking tape at the center of the tailgate striker. 3. Using a spray bottle with 3M protective tape application solution, spray the area where the rear bumper applique will attach. 4. Remove the adhesive backing from the rear bumper applique.

5. Using a spray bottle with 3M protective tape application solution, spray the rear bumper applique. 6. Align the V-notch on the rear bumper applique with the mark on the masking tape. Align the edge of the rear bumper applique along the edge of the curved surface as shown. Smooth the rear bumper applique against the rear bumper and tape each end at the curved surface. 7. Insert the applicator into the soft sleeve. 8. Starting from the front and working rearward, use the soft sleeve to smooth out the center of the upper section on the rear bumper applique. Move the soft sleeve in one direction only.