Home Auto Repair How to Install Rear MDX Emblem on 2019 Acura MDX

How to Install Rear MDX Emblem on 2019 Acura MDX

157

Download 2019 Acura MDX Rear MDX Emblem Installation Instructions – Installing the Rear MDX Emblem 1. Remove the position film from the rear MDX emblem, then remove the rear MDX emblem from the guide form. 2. Install the guide form to the vehicle rear MDX emblem on the tailgate. 3. Attach masking tape along the guide form as shown. 4. Remove the guide form from the tailgate. 5. Using a piece of string, remove the vehicle rear MDX emblem by cutting along the outer edges as shown.

Make sure to thoroughly remove the adhesive tape from the tailgate. 6. Install the rear MDX emblem in the guide form, and temporarily secure it with masking tape. 7. Using an alcohol wipe, thoroughly clean the tailgate where the rear MDX emblem will attach. 8. Remove the adhesive backing from the rear MDX emblem. Line up the guide form with the masking tape, and attach the rear MDX emblem to the tailgate. 9. Using the palm of your hand, firmly press the rear MDX emblem against the tailgate for 30 seconds. 10. Remove the guide form and masking tape from the
tailgate.