Home Auto Repair How to Install Rear Parking Sensors on 2019 Acura MDX

How to Install Rear Parking Sensors on 2019 Acura MDX

143

Download 2019 Acura MDX Rear Parking Sensors Installation Instructions – Removing the Vehicle Parts 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the air intake tube. • Disconnect the negative cable from the battery. 2. Open the glove box by pushing the button (unlock with the built-in key). Remove the passenger’s dashboard side vent. 3. Remove the passenger’s dashboard trim panel. Close the glove box.

4. Remove the dashboard center panel and unplug the vehicle connector. 5. Remove the passenger’s dashboard center lower cover. 6. Pull away the door opening seal and remove the driver’s dashboard side lid. 7. Remove the driver’s dashboard side vent. 8. Remove the driver’s outer dashboard trim. 9. Remove the driver’s dashboard lower cover. 10. Remove the driver’s inner dashboard trim. 11. Remove the bolt from the driver’s dashboard center lower cover. 12. Remove the driver’s dashboard center lower cover and unplug the vehicle connector and temperature sensor.