Download 2019 Acura MDX Ski Attachments Installation Instructions – Installing the Ski / Snowboard Attachment 1. Insert the key, and turn it clockwise to unlock the ski attachment. 2. Push the button, and raise the holder block of the ski attachment. 3. Turn the two brackets on the ski attachment as shown. 4. Using a wrench, install the ski attachment to the front crossbar with four bolts, four collars, and two brackets. 5. Repeat steps 1 through 4 for the other ski attachment on the rear cross bar.
6. After installation, rock the ski attachment in all directions to make sure it is installed securely without play or rattles. If you find abnormal play or a rattle, retighten the bolts. 7. Write down the key number in the box below in case the key is lost or stolen. How to Load Skis on the Ski Attachments 8. Load the skis with the rear of the skis facing the front of the vehicle. 9. If the bindings cannot be positioned between the front and the rear attachments, install the skis with the rear bindings behind the rear attachment as shown.