Home Auto Repair How to Install the Door Edge Film on a 2019 Acura ILX

How to Install the Door Edge Film on a 2019 Acura ILX

107

Download 2019 Acura ILX Door Edge Film Installation Instructions – 1. Open the left front door and left rear door. Using one alcohol wipe, thoroughly clean the areas where the left door edge films will attach. 2. Close the left front door and left rear door. Using a spray bottle with 3M Protective Tape Application Solution, spray the area where the left front door edge film will attach. NOTE: Spray the outer surface of the door only. If the vehicle is equipped with the door lower trim, go to step 5. Without Door Lower Trim 3.

Open the left front door. Peel back about 50 mm (2.0 in.) of adhesive backing from the left front door edge film. Line up the V-notch with the bottom of the character line on the left front door as shown. 4. Line up the center line on the left front door edge film with the edge of the left front door. While applying light pressure, carefully remove the adhesive backing, and attach the left front door edge film to the left front door. Go to step 8. With Door Lower Trim 5. Using scissors, cut off the left front door edge film as shown. 6. Open the left front door.