Home Auto Repair How to Install the Door Handle Films on a 2019 Acura ILX

How to Install the Door Handle Films on a 2019 Acura ILX

141

Download 2019 Acura ILX Door Handle Films Installation Instructions – 1. Attach the masking tape to the left front door as shown. 2. Using an alcohol wipe to thoroughly clean the area where the left front door handle film will attach. 3. Using a spray bottle with 3M protective tape application solution, spray the area where the left front door handle film will attach. 4. Remove the adhesive backing from the left front door handle film. NOTE: Check the identification mark and the direction of the top and bottom. 5. Spray the left front door handle film with the 3M protective tape application solution.

6. Line up the edge of the left front door handle film with the edge of the masking tape as shown. 7. Using the Mini Soft Spreader/Applicator, start from the center and work outward to smooth out the left front door handle film. If you see an air bubble, stop and gently peel up that section to work out the bubble. Work slowly and keep pressure against the left front door handle film. 8. Using a shop towel, wipe off the 3M protective tape application solution. Allow the left front door handle film to dry thoroughly. Remove the masking tape.