Home Auto Repair How to Install Illuminated Door Sill Trim on a 2019 Acura ILX

How to Install Illuminated Door Sill Trim on a 2019 Acura ILX

169

Download 2019 Acura ILX Illuminated Door Sill Trim Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Pull away the door opening seal, remove the passenger’s dashboard side cover. 3. Open the glove box, and remove the passenger’s dashboard trim. 4. Close the glove box. 5. Remove the passenger’s dashboard under cover, and remove the bulb socket. 6. Remove the passenger’s front door sill trim. 7. Pull away the door opening seal, and remove the passenger’s kick panel. 8. Remove the trunk lid/fuel fill door opener cover. Remove one self-tapping screw. Using the key, unlock the trunk lock.

9. Remove the driver’s front door sill trim. 10. Pull away the door opening seal, and remove the driver’s kick panel. 11. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. 12. Move the shift lever to Neutral. Apply masking tape to the areas shown. 13. Remove the heater control panel, and unplug the vehicle connectors. 14. Remove the two bolts from the glove box. 15. Remove the glove box, and unplug the vehicle connectors. 16. Pull out the two clips to release the rear seat cushion hooks.