Home Auto Repair How to Install Rear Bumper Applique on 2019 Acura ILX

How to Install Rear Bumper Applique on 2019 Acura ILX

111

Download 2019 Acura ILX Rear Bumper Applique Installation Instructions – 1. Open the trunk. Using an alcohol wipe, thoroughly clean the area where the rear bumper applique will attach. 2. Using a spray bottle with 3M protective tape application solution, spray the area where the rear bumper applique will attach. 3. Remove the adhesive backing from the side of the rear bumper applique with the 3M mark. 4. Spray the rear bumper applique with 3M protective tape application solution. 5. Line up the V-notch on the rear bumper applique with the trunk lid anchor. Line up the edge of the rear bumper applique with the bottom of the character line.

Smooth the rear bumper applique against the rear bumper. 6. Insert the applicator into the felt sleeve. 7. Starting from the center and working outward, use the felt sleeve to smooth out the center of the upper section on the rear bumper applique. NOTE: Move the felt sleeve in one direction only. If you see an air bubble, stop and gently peel up that section to work out the bubble. Work slowly and keep pressure against the rear bumper applique. 8. Starting from the center and working outward, use the felt sleeve to smooth the left and right sides of the upper section on the rear bumper applique.