Download 2019 Acura ILX Remote Engine Start Kit Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the driver’s outer dashboard trim. 3. Remove the driver’s inner dashboard trim, and disconnect the ENGINE START/STOP switch connector. 4. Open the glove box, and remove the passenger’s dashboard trim panel. 5. Remove the driver’s dashboard lower cover. NOTE: To avoid whitening the dashboard cover, start by gently and evenly pulling out on the lower edge of the cover to release its lower clips, then work your way up the cover to release the middle and top clips.
6. Remove the climate control unit, and disconnect the connector. 7. Remove the two bolts. Pull out the audio unit assembly and disconnect the connectors. Remove the harness clips and remove the audio unit. NOTE: There is a lever lock on audio unit connectors. 8. Lower the tilt lever. Pull and lower the steering wheel. 9. Remove the column band. 10. Reconnect the negative battery cable. Then, turn the ignition to ON. Turn the steering wheel 90° counterclockwise. Using a plastic trim tool, release the retaining tab.