Download 2019 Honda Accord 1.5L Automatic Day/Night Mirror Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the roof console: • Using a plastic trim tool, pry out and remove the left and right lenses. • Open the sunglass holder and remove the four screws. • Remove the roof console and unplug the vehicle connectors. 3. Loosen the TORX screw and remove the rearview mirror. 4. Release the passenger’s sunvisor from the passenger’s sunvisor holder. 5. Remove the passenger’s sunvisor holder by rotating it 45° counterclockwise.
6. Remove the driver’s sunvisor and unplug the vehicle connector: • Pivot the driver’s sunvisor downward and release it from the driver’s sunvisor holder. • Wrap masking tape around the tip of a flat-tip screwdriver. • Locate the slot in the base cover and insert the flat-tip screwdriver into the slot. Push in and hold the retaining tab. • While holding the retaining tab, push up on the sunvisor and rotate it toward the door. NOTE: If the retaining tab does not stay pushed in, return the sunvisor to its original position and repeat this step.