Home Auto Repair How to Install Door Edge Films on 2019 Honda Accord 1.5L

How to Install Door Edge Films on 2019 Honda Accord 1.5L

101

Download 2019 Honda Accord 1.5L Door Edge Films Installation Instructions – 1. Open the left front door. Using the alcohol wipe, thoroughly clean the area where the left front door edge film will attach. 2. Open the left rear door. Using the alcohol wipe, thoroughly clean the area where the left rear door edge film will attach. 3. Close the left front and rear doors. Using a spray bottle with 3M protective tape application solution, spray the area where the left front door edge film will attach. NOTE: Spray the outer surface of the door only.

If the vehicle is equipped with body side moldings, go to step 6; otherwise, continue with step 4. 4.Open the left front door again. Peel back about 50 mm (1.97 in.) of adhesive backing from the left front door edge film. Line up the left front door edge film with the left front door as shown. NOTE: Check the identification mark and the installation position of the left front door edge film. 5. While applying light pressure, carefully remove the adhesive backing. Go to step 10. With Body Side Moldings 6. Using scissors, cut off the left front door edge film as shown.