Home Auto Repair How to Install Illuminated Door Sill Trims on 2019 Honda Accord 1.5L

How to Install Illuminated Door Sill Trims on 2019 Honda Accord 1.5L

115

Download 2019 Honda Accord 1.5L Illuminated Door Sill Trims Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the passenger’s dashboard under cover. 3. Remove the passenger’s door sill trim. 4. Pull away the door opening seal and remove the passenger’s kick panel. 5. Release and pull up on the rear seat cushion. Place a piece of masking tape as shown to prevent the hook from re-engaging. 6. Remove the right rear door sill trim. 7. Remove the driver’s dashboard lower cover and unplug the vehicle connectors.

8. Lower and pull out the steering wheel as shown. 9. Apply masking tape to the upper column cover. 10. Connect the negative cable to the battery, then turn the ignition to ON. Turn the steering wheel 90° counterclockwise. Using a plastic trim tool, release the upper column cover. 11. Turn the steering wheel 180° clockwise. Using a plastic trim tool, release the upper column cover. 12. Release the upper column cover and secure it to the dashboard with masking tape. 13. Remove the self-tapping screw from the lower column cover.