Home Auto Repair How to Install a Moonroof Visor on a 2019 Honda Accord

How to Install a Moonroof Visor on a 2019 Honda Accord

131

Download 2019 Honda Accord Moonroof Visor Installation Instructions – 1. Open the moonroof. Roll up the two shop towels, and insert them between the roof panel and air deflector to lower the air deflector. NOTE: Be careful not to damage the air deflector. 2. Measure and make the two marks on the roof panel as shown. 3. Using an alcohol wipe, thoroughly clean the roof panel at each of the two marks you have made, but do not wipe off the marks. 4. Remove the adhesive backings from two pieces of protective tape, and attach one to the roof panel at each of the two marks you made.

Wrap 10 mm (0.39 in.) of the protective tape around the lip of the moonroof opening. 5. Locate the second indentations from the right front corner and left front corner of the moonroof opening. Using an alcohol wipe, thoroughly clean the roof panel where the protective tape will attach. 6. Remove the adhesive backings from two pieces of protective tape, and attach one to the roof panel at each second indentation. 7. Place the left and right brackets B over the two pieces of protective tape and around the lip of the roof panel, and tape them into position with the strips of masking tape.