Home Auto Repair How to Install Rear Bumper Applique on 2019 Honda Accord

How to Install Rear Bumper Applique on 2019 Honda Accord

95

Download 2019 Honda Accord Rear Bumper Applique Installation Instructions – Installing the Rear Bumper Applique 1. Open the trunk lid. Use the alcohol wipe to thoroughly clean the area where the rear bumper applique will attach. 2. Attach a strip of masking tape to the rear bumper as shown. Using a felt-tip pen, make a mark on the masking tape at the center of the striker. 3. Using a spray bottle with the 3M protective tape application solution, spray the area where the rear bumper applique will attach. 4. Remove the adhesive backing from the side of the rear bumper applique.

5. Spray the rear bumper applique with the 3M protective tape application solution. 6. Line up the V-notch on the rear bumper applique with the mark on the masking tape. Line up the edge of the rear bumper applique along the edge of the curved surface as shown. Smooth the rear bumper applique against the rear bumper. 7. Insert the applicator into the soft sleeve. 8. Starting from the front and working rearward, use the soft sleeve to smooth out the center of the upper section on the rear bumper applique. Move the soft sleeve in one direction only.