Home Auto Repair How to Install Rear Bumper Metal Panel on 2019 Honda Accord

How to Install Rear Bumper Metal Panel on 2019 Honda Accord

100

Download 2019 Honda Accord Rear Bumper Metal Panel Installation Instructions – Installing the Rear Bumper Metal Panel 1. Open the trunk lid. Attach masking tape to the rear bumper, and mark it using a felt-tip pen as shown. 2. Line up the mark on the sticker with the mark on the masking tape. Then, attach masking tape at both ends as shown. 3. Remove the rear bumper metal panel from the rear bumper. 4. Using the alcohol wipe, thoroughly clean the rear bumper where the rear bumper metal panel will attach. 5. Peel back the adhesive backings, and tape them to the front surface of the rear bumper metal panel with masking tape.

Remove the remaining adhesive backings. 6. Attach the rear bumper metal panel to the rear bumper by lining it up with the masking tape as shown. 7. While applying light pressure to the rear bumper metal panel, carefully remove the taped adhesive backings as shown. 8. Using a rubber roller, apply firm pressure against the rear bumper metal panel and roll from one end to the other. NOTE: Apply firm pressure especially at the ends. 9. Remove masking tape and the sticker on the rear bumper metal panel.