Home Auto Repair How to Install Rear USB Charger on 2019 Honda Accord

How to Install Rear USB Charger on 2019 Honda Accord

127

Download 2019 Honda Accord Rear USB Charger Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Open the glove box and remove the passenger’s trim panel. Close the glove box. 3. Remove the right console side cover. 4. Remove the driver’s dashboard lower cover and unplug the vehicle connectors. 5. Lower and pull out the steering wheel as shown. 6. Apply masking tape to the upper column cover. 7. Connect the negative cable to the battery, then turn the ignition to ON. Turn the steering wheel 90° counterclockwise. Using a plastic trim tool, release the upper column cover.

8. Turn the steering wheel 180° clockwise. Using a plastic trim tool, release the upper column cover. 9. Release the upper column cover and secure it to the dashboard with masking tape. 10. Remove the self-tapping screw from the lower column cover. 11. Turn the steering wheel 180° counterclockwise, and remove the other self-tapping screw from the lower column cover. 12. Remove the lower column cover. 13. Turn the ignition to OFF, then disconnect the negative cable from the battery. 14. Remove the driver’s inner dashboard trim, and unplug the vehicle connector.