Home Auto Repair How to Install the Wireless Charger on 2019 Honda Accord

How to Install the Wireless Charger on 2019 Honda Accord

122

Download 2019 Honda Accord Wireless Charger Installation Instructions – 1. Disconnect the negative cable from the battery. 2.Open the glove box and remove the passenger’s trim panel. Close the glove box. 3. Remove the right console side cover. 4. Remove the driver’s dashboard lower cover and unplug the vehicle connectors. 5. Remove the driver’s door sill trim. 6. Pull away the door opening seal and remove the driver’s kick panel. 7. Lower and pull out the steering wheel as shown. 7. Lower and pull out the steering wheel as shown.

8. Apply masking tape to the upper column cover. 9. Connect the negative cable to the battery, then turn the ignition to ON. Turn the steering wheel 90° counterclockwise. Using a plastic trim tool, release the upper column cover. 10. Turn the steering wheel 180° clockwise. Using a plastic trim tool, release the upper column cover. 11. Release the upper column cover and secure it to the dashboard with masking tape. 12. Remove the self-tapping screw from the lower column cover. 13. Turn the steering wheel 180° counterclockwise, and remove the other self-tapping screw from the lower column cover.