Home Auto Repair How to Install 19-inch Aluminum Wheel on 2019 Honda Civic Coupe

How to Install 19-inch Aluminum Wheel on 2019 Honda Civic Coupe

177

Download 2019 Honda Civic Coupe 19-inch Aluminum Wheel Installation Instructions – 1. Open the driver’s door. Using isopropyl alcohol on a shop towel, thoroughly clean the area where the tire pressure information label will attach. Remove the adhesive backing from the tire pressure information label, and attach it over the standard tire pressure information label as shown. 2. Attach the “Supplemental Information” page included in this kit into the owner’s guide as described on the “Important Information to Dealer” page. Inch-up Tire Pressure Programming (2 and 4 Door models)

3. Connect the i-HDS/DST-i to the data link connector, then turn the ignition switch on. 4. Start the Honda Diagnostic System. 5. Select the Honda Systems and click the check button. 6. Select the ABS/TCS/VSA and click the check button. 7. Select the TPMS (VSA) threshold and click the check button. 8. Select the YES. 9. Select the 19 inch and Summer, and click the check button. 10. Select the YES. 11. Click the check button. 12. Turn the ignition switch off. 13. The following message will display: Turn the ignition switch to ON. Then turn the ignition switch on.