Home Auto Repair How to Install Door Edge Films on 2019 Honda Civic Coupe

How to Install Door Edge Films on 2019 Honda Civic Coupe

185

Download 2019 Honda Civic Coupe 2 Door Door Edge Films Installation Instructions – 1. Open the left door. Using an alcohol swab, thoroughly clean the area where the left door edge film will attach. 2. Close the left door. Using a spray bottle with 3M protective tape application solution, spray the outer area where the left door edge film will attach. NOTE: Do not spray the inner surface. If the vehicle is equipped with the side protectors, go to step 5; if not, continue to step 3. Without Side Protectors 3. Open the left door. Peel back about 50 mm (1.97 in.) of adhesive backing from the left door edge film.

Line up the V-notch with the bottom of the character line on the left door as shown. 4. Line up the center line on the left door edge film with the edge of the left door. While applying light pressure, carefully remove the adhesive backing, and attach the left door edge film to the left door. Go to step 10. With Side Protectors 5. Using scissors, cut off the left door edge film as shown. 6. Open the left door. Peel back about 50 mm (1.97 in.) of adhesive backing from the upper part of left door edge film. Line up the V-notch with the bottom of the character line on the left door as shown.