Home Auto Repair How to Install the Door Visors on a 2019 Honda Civic Coupe

How to Install the Door Visors on a 2019 Honda Civic Coupe

103

Download 2019 Honda Civic Coupe 4-Door Door Visors Installation Instructions – Installing the Front Door Visors 1. Fully lower the left front door glass. 2. Pull out the glass run channel in the areas shown. 3. Install two brackets between the door sash and the glass run channel at the measurements shown. Seat the glass run channel properly around the brackets. 4. Using an alcohol swab, thoroughly clean the area where the left front door visor will attach. 5. Peel back the adhesive backing from each adhesive tape, and tape the ends to the front surface of the left front door visor with masking tape.

6. Line up each hole on the two brackets with the two holes on the left front door visor. 7. Secure the left front door visor to the two brackets with two clips. Make sure to push up on the brackets while installing the two clips. NOTE: Be extremely careful when installing the clips; they cannot be reinstalled after installation. 8. Adjust the position of the left front door visor as shown. 9. While applying light pressure against the left front door visor, carefully remove the adhesive backings in the order shown. Make sure to push up on the brackets while removing the adhesive backings.