Home Auto Repair How to Install a Cargo Hook on a 2019 Honda Civic Coupe

How to Install a Cargo Hook on a 2019 Honda Civic Coupe

92

Download 2019 Honda Civic Coupe Cargo Hook Installation Instructions – 1. Screw the rivet nut onto the mandrel of the rivet nut tool as shown. 2. Open the trunk lid. Insert the rivet nut into the hole in the vehicle panel, and install the hex wrench on the rivet nut tool. 3. While holding the rivet nut tool with the hex wrench, turn the open end wrench clockwise to install the rivet nut to the vehicle panel. 4. Remove the rivet nut tool from the rivet nut by turning the hex wrench counterclockwise.

5. Align the cargo hook pin with the hole in the vehicle panel, and secure the cargo hook to the vehicle panel using the bolt, spring washer, and small washer. Torque the bolt to 4.0 N·m (3.0 lb·ft). NOTE: • Be careful not to damage the body. • This instruction shows the cargo hook being installed on the left side of the vehicle. An additional cargo hook (sold separately) can be installed on the right side of the vehicle.