Home Auto Repair How to Install Front Under Spoiler on 2019 Honda Civic Coupe

How to Install Front Under Spoiler on 2019 Honda Civic Coupe

109

Download 2019 Honda Civic Coupe Front Under Spoiler Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the front bumper: • Attach masking tape to the areas shown on each side. • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the hood seal. • Remove four self-tapping screws, two bolts, two hex bolts, and seven clips. • With the help of an assistant, release seven retaining tabs on each side. NOTE: Remove the retaining tabs in the direction and order shown.

• With the help of an assistant, remove the front bumper. Place the front bumper on a blanket to prevent damage. Installing the Front Under Spoilers 3. Using a pushpin, pierce the inside of the front bumper through the center of two scribe marks. 4. While wearing eye protection, drill the two pierced marks to 6 mm. NOTE: • Wrap masking tape around each drill bit 10 mm (0.39 in.) away from the tip or use a drill stop. • First drill with a 3 mm drill bit, then finish with a 6 mm drill bit. 5. Using a file, remove any burrs from the holes.