Home Auto Repair How to Install Illuminated Door Sill Trim on 2019 Honda Civic Coupe

How to Install Illuminated Door Sill Trim on 2019 Honda Civic Coupe

92

Download 2019 Honda Civic Coupe Illuminated Door Sill Trim Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the passenger’s dashboard side lid, and unplug the vehicle connector, if equipped. Pull away the door opening seal. 3. Remove the passenger’s front door sill trim. 4. Pull away the door opening seal, and remove the passenger’s kick panel. 5. Remove the passenger’s under cover. 6. Open the glove box, push inward on the glove box stops and remove the glove box. 7. Remove the glove box cover, and unplug the vehicle connector, if equipped.

8. Remove the driver’s dashboard lower cover, unplug the vehicle connectors and aspirator hose. 9. Remove the driver’s front door sill trim. 10. Pull away the door opening seal, and remove the driver’s kick panel. 11. Using isopropyl alcohol on a shop towel, thoroughly clean the fuse case where the fuse label will attach. 12. Attach the fuse label to the door sill trim harness fuse case. 13. Plug the door sill trim harness 6-pin connector into the vehicle 6-pin connector. 14. Attach the door sill trim harness 6-pin connector to any of the positions shown.