Download 2019 Honda Civic Coupe Interior Illumination Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the passenger’s dashboard side lid, and unplug the vehicle connector, if equipped. Pull away the door opening seal. 3. Remove the passenger’s under cover. 4. Open the glove box, push inward on the glove box stops and remove the glove box. 5. Remove the glove box cover, and unplug the vehicle connector, if equipped. 6. Remove the driver’s dashboard lower cover, unplug the vehicle connectors, and aspirator hose.
7. Remove the left console armrest. 8. Attach masking tape to the area shown. 9. Remove the left center console trim. 10. Remove the right console armrest. 11. Attach masking tape to the area shown. 12. Remove the right center console trim. 13. Remove the A/C control unit, and unplug the vehicle connectors. 14. Remove the audio unit, and unplug the vehicle connectors. 15. Using a pushpin, pierce the center of two scribe marks on the driver’s dashboard lower cover. 16. While wearing eye protection, drill the pierced mark with a 3 mm drill bit, then finish with a 5 mm drill bit as shown.