Download 2019 Honda Civic Coupe LED Fog Lights Installation Instructions – 1. Disconnect the negative cable from the battery. If the vehicle is equipped with vehicle fog lights, go to step 13; otherwise, continue with step 2. Without Vehicle Fog Lights 2. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors and aspirator hose. 3. Remove or release the driver’s front door sill trim. Except 2-Door models: three clips and four retaining tabs. 4. Pull away the door opening seal, and remove the driver’s kick panel. 5. Lower the steering wheel.
Attach masking tape to the upper column cover as shown. 6. If necessary, connect the negative cable to the battery and set the power mode to ON. Turn the steering wheel 90° clockwise. Using a plastic trim tool, release the hooks. 7. Turn the steering wheel 180° counterclockwise. Using a plastic trim tool, release two hooks. 8. Release the upper column cover, and secure it to the dashboard with masking tape. 9. Remove one self-tapping screw from the lower column cover. 10. Turn the steering wheel 180° clockwise, and remove one self-tapping screw from the lower column cover.