Download 2019 Honda Civic Coupe Wheel Stickers Installation Instructions – 1. Using an alcohol wipe, thoroughly clean the aluminum wheel where the sticker will attach. 2. Remove the adhesive backing from the sticker. 3. Line up the sticker with the aluminum wheel, and attach it as shown. 4. While applying light pressure against the aluminum wheel, attach the sticker. 5. Remove the film from the sticker.
6. Repeat steps 1 through 5 to install the other stickers to the other aluminum wheels. NOTE: • The illustrations of the aluminum wheels are shown for reference purposes only. • This kit should be installed only if the ambient air temperature is 60°F (15°C) or above. • To allow the adhesive to cure, do not wash the vehicle for 24 hours. Make sure the customer is aware of this.