Download 2019 Honda CR-V 19-inch Aluminum Wheel Installation Instructions – 1. Open the driver’s door. Using isopropyl alcohol on a shop towel, thoroughly clean the area where the accessory tire pressure information label will attach. Remove the adhesive backing from the accessory tire pressure information label, and attach the accessory tire pressure information label over the standard tire pressure information label as shown. 2. Attach the “Supplemental Information” page included in this kit into the owner’s guide as described on the “Important Information to Dealer” page.
Inch-up Tire Pressure Programming NOTE: Make sure you are using the latest i-HDS version as described on SIS. 3. Connect the i-HDS to the data link connector, then turn the ignition to ON. 4. Start the Diagnostic System, select the Connect to the Vehicle. 5. Select the System Selection Menu. 6. Select the ABS/VSA and click the check button. 7. Select the TPMS (VSA) threshold and click the check button. 8. Select the YES. 9. Select the YES. 10. Select the 19 inch and click the check button.