Download 2019 Honda HR-V 18-inch Aluminum Wheel Installation Instructions – 1. Open the driver’s door. Using isopropyl alcohol on a shop towel, thoroughly clean the area where the tire pressure information label will attach. Remove the adhesive backing from the tire pressure information label, and attach it over the standard tire pressure information label as shown. 2. Attach the Supplemental Information page included in this kit into the Owner’s Guide as described on the Important Information to Dealer page.
Inch-up Tire Pressure Programming NOTE: Make sure you are using the latest HDS version as described on SIS. 3. Connect the HDS to the data link connector, then turn the ignition to ON. 4.Start the Diagnostic System, select Connect to the Vehicle. 5. Select System Selection Menu. 6. Select ABS/VSA, and click the check button. 7. Select TPMS (VSA) threshold, and click the check button. 8. Select YES. 9. Select YES. 10. Select 18 inch, and click the check button. 11. Select Mud and snow, and click the check button.