Home Auto Repair How to Install Automatic Day/Night Mirror on 2019 Honda HR-V

How to Install Automatic Day/Night Mirror on 2019 Honda HR-V

144

Download 2019 Honda HR-V Automatic Day/Night Mirror Installation Instructions – 1. Disconnect the negative cable from the battery. If the vehicle is equipped with the automatic day/night mirror, continue with step 2; otherwise, go to step 4. With automatic day/night mirror 2. Remove the harness cover. 3. Loosen the TORX screw. Remove the rearview mirror, and unplug the vehicle connector. Go to step 5. Without automatic day/night mirror 4. Loosen the TORX screw, and remove the rearview mirror. If the vehicle is equipped with the Honda Sensing®, continue with step 5; otherwise, go to step 6.

With Honda Sensing® 5. Remove the cover. 6. Remove the left and right lenses, and remove the two bolts. With moonroof: Remove the map light console. Then, unplug the vehicle connectors, and remove the switch. 7. Release the passenger’s sunvisor. 8. Remove the passenger’s sunvisor holder: • Wrap masking tape around the tip of a flat-tip screwdriver. • Release three retaining tabs on the passenger’s sunvisor holder. • While holding down the passenger’s sunvisor holder as shown, use a flat-tip screwdriver wrapped with masking tape to remove the passenger’s sunvisor holder.