Home Auto Repair How to Install a Cargo Cover on a 2019 Honda HR-V

How to Install a Cargo Cover on a 2019 Honda HR-V

73

Download 2019 Honda HR-V Cargo Cover Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Pull away the door opening seal. Remove the right rear door sill trim. 3. Pull away the door opening seal. Remove the left rear door sill trim. 4. Pull the knobs and fold each rear seat-back forward. 5. Using a plastic trim tool, pry open the two screw covers. Remove the two tie-down hooks. 6. Remove the cargo floor lid. 7. Remove the tool box. NOTE: Follow the same procedure for all tool boxes.

8. Pull away the weatherstrip. Remove the rear trim panel. 9. Pull away the weatherstrip and door opening seal. Remove the left rear side trim panel, and unplug the vehicle connector (if equipped). 10. Pull away the weatherstrip and door opening seal. Remove the right rear side trim panel. 11. Using a plastic trim tool, pry up the tailgate upper trim panel. Remove the tailgate upper trim panel. 12. Remove the left and right tailgate side trim panels. 13. Using an awl, pierce the center of the seven round ribs on the right cargo side trim panel as shown.