Home Auto Repair How to Install the Console Lights on a 2019 Honda HR-V

How to Install the Console Lights on a 2019 Honda HR-V

88

Download 2019 Honda HR-V Console Lights Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the passenger’s under cover. 3. Pull away the door opening seal, and remove the passenger’s dashboard side lid. 4. Remove the two bolts. 5. Pull away the door opening seal. Open the glove box, and remove it. 6. Pull away the door opening seal, and remove the driver’s dashboard side lid. 7. Apply masking tape to the lower column cover. 8. Pull away the door opening seal.

Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. If the vehicle is equipped with automatic climate control, continue with step 9; otherwise, go to step 12. With automatic climate control 9. Apply masking tape to the climate control unit, center console panel, center console pad, and shift lever as shown. Move the shift lever to Drive. 10. Remove the center console switch trim, and unplug the vehicle connector. 11. Remove the climate control unit, and unplug the vehicle connectors. Go to step 17.