Home Auto Repair How to Install the Parking Sensors on a 2019 Honda HR-V

How to Install the Parking Sensors on a 2019 Honda HR-V

109

Download 2019 Honda HR-V Parking Sensors Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the passenger’s under cover. 3. Pull away the door opening seal, and remove the passenger’s dashboard side lid. 4. Remove the two bolts. 5. Pull away the door opening seal. Open the glove box, and remove the glove box. 6. Lower the steering wheel. Apply masking tape to the upper column cover, dashboard, combination light switch, and wiper switch as shown. 7. Remove the meter visor.

8. Remove the select/reset knob, and pull out the meter. 9. Remove the meter, and unplug the vehicle meter 32-pin connector. NOTE: Place the meter on a shop towel facing up. 10. Pull away the door opening seal, and remove the driver’s dashboard side lid. 11. Apply masking tape to the lower column cover. 12. Pull away the door opening seal. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. If the vehicle is equipped with automatic climate control, continue with step 13; otherwise go to step 16.