Download 2019 Honda Fit Arnrest Console Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Open the glove box, push inward on the stops, and remove the glove box. 3. Apply masking tape as shown. 4. Remove the center lower cover, and unplug the vehicle connectors. MT models, continue with step 5; otherwise, go to step 6. MT Models 5. Remove the shift lever knob. 6. Remove the parking brake cover trim. If the vehicle is equipped with an armrest, continue with step 7; otherwise, go to step 18. With Armrest
7. Remove the center console rear trim. 8. Remove the center console, and unplug the vehicle connectors. 9. Remove the beverage holder. 10. Remove the console panel: CVT models • Remove the six screws, and release the eight retaining tabs. MT models • Remove the shift lever boot and the console panel. If the vehicle is equipped with seat heaters, continue with step 11; otherwise, go to step 13. With Seat Heaters 11. Remove the center console sub cord, and unplug the vehicle connectors. 12. Remove the driver’s and passenger’s seat heater switches.