Download 2019 Honda Fit Door Lining Protectors Installation Instructions – 1. Line up the right protector, and attach masking tape to the right front door lining as shown. 2. Remove the right protector. 3. Peel back the adhesive backings, and tape them to the front surface of the right protector with masking tape. 4. Using an alcohol swab, thoroughly clean the right front door lining where the right protector will attach.
Line up the right protector with the right front door lining as shown. 5. While applying light pressure against the right protector, carefully remove the taped adhesive backings. 6. Remove the masking tape. 7. Using the rubber roller, apply firm pressure while rolling, especially at the ends, to set the adhesive. 8. Repeat steps 1 through 7 to install the left protector on the left side of the vehicle.