Home Auto Repair How to Install Moonroof Visor on 2019 Honda Fit

How to Install Moonroof Visor on 2019 Honda Fit

110

Download 2019 Honda Fit Moonroof Visor Installation Instructions – 1. Open the moonroof. Roll up two shop towels, and insert them between the roof panel and air deflector to lower the air deflector. Be careful not to damage the air deflector. 2. Measure and make two marks on the roof panel at the measurements shown. 3. Using isopropyl alcohol on a shop towel, clean the roof panel at each of the two marks you have made, but do not wipe off the marks. 4.Remove the adhesive backing from the two protective tapes, and attach them to the roof panel at the two marks you made.

5. Measure and make two marks on the protective tapes at the measurements shown. 6. Locate the second indentations from the center of the moonroof opening. Using isopropyl alcohol on a shop towel, clean the roof panel where the protective tapes will attach. 7. Remove the adhesive backing from the two protective tapes, and attach them to the roof panel at second indentation. 8. Place the two brackets B into position over the two protective tapes and around the lip of the roof panel, and tape them into position with the strips of masking tape.