Download 2019 Honda Fit Side Under Spoilers Installation Instructions – Installing the Spoilers 1. Turn the steering wheel fully counterclockwise. 2. Using a pushpin, pierce the centers of the two clips shown on the left front inner fender. 3. Loosely install the three clamps to the left spoiler with the three bracket screws. 4. Position the left spoiler on the vehicle panel. 5. Loosely install the left spoiler with the two self-tapping screws. NOTE: Make sure there is no gap between the left front inner fender and the left spoiler. 6. Loosely install the left spoiler with masking tape.
7. Using a felt-tip pen, mark the vehicle panel as shown. 8. Attach the masking tape to the vehicle panel as shown. 9. Remove the left spoiler while leaving the masking tape on the vehicle panel. 10. Using a utility knife, remove the undercoat as shown. NOTE: Remove the undercoat in the marked areas only. 11. Line up the template with the vehicle panel as shown. Secure the template to the vehicle panel with masking tape. 12. Using the two alcohol swabs, thoroughly clean the vehicle panel where the bracket and the left spoiler will attach.