Download 2019 Honda Fit Tailgate Spoiler Installation Instructions – 1. Disconnect the negative battery cable from the battery. 2. Open the tailgate, and remove the vehicle grommets and two bolts. 3. Install the two vehicle grommets. NOTE: Make sure the grommets are seated properly. 4. Close the tailgate, and remove the tailgate spoiler cover. 5. With the help of an assistant, remove the tailgate spoiler as shown. 6. Remove the two grommets from the tailgate. 7. Secure the high mount brake light connector to the tailgate.
8. Open the tailgate, and disconnect the vehicle rear washer tube. 9. Close the tailgate, and remove the vehicle rear washer tube. Installing the Spoiler 10. Remove the hose connector from the vehicle rear washer tube. 11. Install the hose connector on the rear washer tube. 12. Secure the steel wire to the rear washer tube with electrical tape. 13. Open the tailgate. Route the rear washer tube, and install the rear washer nozzle as shown. Then, remove the steel wire. 14. Connect the rear washer tube, and install the vehicle grommet.