Home Auto Repair How to Install Armrest Illumination on 2019 Honda Insight

How to Install Armrest Illumination on 2019 Honda Insight

113

Download 2019 Honda Insight Armrest Illumination Installation Instructions – 1. Remove the right side panel, and disconnect the negative cable from the battery. NOTE: Wait 3 minutes after turning the power switch to OFF before disconnecting the battery. 2. Open the glove box, push inward on the glove box stops, and remove the glove box. 3. Apply masking tape as shown. 4. Remove the passenger’s dashboard trim. 5. Apply masking tape as shown. 6. Remove the A/C control unit, and unplug the vehicle connector.

7. Remove the audio unit, and unplug the vehicle connectors. 8. Remove the console mat. 9. Apply masking tape as shown. 10. Remove the console inner trim. 11. Apply masking tape as shown. 12. Remove the console shift panel, and unplug the vehicle connector. 13. Remove the switch panel, and unplug the vehicle connectors. 14. Remove the console driver’s trim. 15. Remove the console panel, and unplug the vehicle connectors. 16. Remove the driver’s console side armrest. 17. Remove the passenger’s console side armrest.