Home Auto Repair How to Install Automatic Day/Night Mirror on 2019 Honda Insight

How to Install Automatic Day/Night Mirror on 2019 Honda Insight

128

Download 2019 Honda Insight Automatic Day/Night Mirror Installation Instructions – 1. Remove the right side panel, and disconnect the negative cable from the battery. NOTE: Wait 3 minutes after turning the power switch to OFF before disconnecting the battery. 2. Pull away the door opening seal, and remove the passenger’s dashboard side lid. 3. Remove the passenger’s under cover. 4. Open the glove box, push inward on the glove box stops, and remove the glove box. 5. Remove the glove box cover.

6. Remove the cover from the camera cover. 7. Remove the camera cover. NOTE: To prevent damage, remove carefully in following order. 8. Loosen the Torx screw, and remove the rearview mirror from the mirror mount. 9. Remove the left and right map light lenses from the roof console. Remove the two self-tapping screws. Remove the roof console, and unplug the vehicle connectors. 10. Release the passenger’s sunvisor from the passenger’s sunvisor holder. 11. Remove the passenger’s sunvisor holder by rotating it 90° counterclockwise.