Home Auto Repair How to Install a Cargo Hook on a 2019 Honda Insight

How to Install a Cargo Hook on a 2019 Honda Insight

104

Download 2019 Honda Insight Cargo Hook Installation Instructions – 1. Screw the rivet nut onto the mandrel of the rivet nut tool as shown. 2. Open the trunk lid. Insert the rivet nut into the hole in the vehicle panel, and install the hex wrench on the rivet nut tool. 3. While holding the rivet nut tool with the hex wrench, turn the open end wrench counterclockwise to install the rivet nut to the vehicle panel.

4. Remove the rivet nut tool from the rivet nut by turning the hex wrench counterclockwise. 5. Line up the cargo hook pin with the hole in the vehicle panel, and secure the cargo hook to the vehicle panel using the bolt, spring washer, and small washer. Torque the bolt to 3.0 lb-ft (4.0 N·m).