Home Auto Repair How to Install Door Edge Guards on 2019 Honda Insight

How to Install Door Edge Guards on 2019 Honda Insight

165

Download 2019 Honda Insight Door Edge Guards Installation Instructions – Installing the Front Door Edge Guards 1. Position the right front door edge guard as shown. 2. Mark the sealant at the top and bottom ending points of the right front door edge guard. 3.Remove the right front door edge guard. 4.Position the cutting edge of the seam sealant cutting tool against the right front door edge, and trim the seam sealant from mark to mark. NOTE: The cutting tool cuts in only one direction. 5. Apply touch-up paint to the cut seam sealant area, and let it dry.

6. Position the right front door edge guard on the right front door edge, and line it up with the marks made in step 2. 7. Starting at the character line, tap the right front door edge guard into position with a series of light taps using a rubber mallet, then work up and down. Make sure the position of the right front door edge guard is correct. NOTE: Once in place, do not remove, reposition, or reinstall the right front door edge guard or it will not hold securely. 8. Repeat steps 1 through 7 to install the left front door edge guard.