Download 2019 Honda Insight Door Lining Covers Installation Instructions – 1. Line up the front template with the edges of the right front speaker and right front door pocket as shown. Tape the front template to the right front door lining with masking tape. 2. Peel back the adhesive backings, and tape them to the front surface of the right front door lining cover with masking tape. Remove the remaining adhesive backings. 3. Using isopropyl alcohol on a shop towel, thoroughly clean the area where the right front door lining cover will attach.
4. Line up the right front door lining cover with the front template, and attach it as shown. 5. While applying light pressure against the right front door lining cover, carefully remove the taped adhesive backings. 6. Using the rubber roller, apply firm pressure while rolling, especially at the ends, to set the adhesive as shown. 7. Remove the front template. 8. Turn the front template over, and repeat steps 1 through 7 on the left side of the vehicle. 9. Using scissors, cut the rear template as shown.