Home Auto Repair How to Install Illuminated Door Sill Trim on 2019 Honda Insight

How to Install Illuminated Door Sill Trim on 2019 Honda Insight

98

Download 2019 Honda Insight Illuminated Door Sill Trim Installation Instructions – 1. Remove the right side panel, and disconnect the negative cable from the battery. NOTE: Wait 3 minutes after turning the power switch to OFF before disconnecting the battery. 2. Pull away the door opening seal, and remove the passenger’s dashboard side lid. 3. Remove the passenger’s front door sill trim. 4. Pull away the door opening seal, and remove the passenger’s kick panel.

5. Remove the passenger’s under cover. 6. Open the glove box, push inward on the glove box stops, and remove the glove box. 7. Remove the glove box cover. 8. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. 9. Remove the driver’s front door sill trim. 10. Pull away the door opening seal, and remove the driver’s kick panel. 11. Using isopropyl alcohol on a shop towel, thoroughly clean the fuse case where the fuse label will attach. 12. Apply the fuse label to the door sill trim harness fuse case.