Download 2019 Honda Insight LED Fog Lights Installation Instructions – 1. Remove the right side panel, and disconnect the negative cable from the battery. NOTE: Wait 3 minutes after turning the power switch to OFF before disconnecting the battery. 2. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. 3. Remove the driver’s front door sill trim. 4. Pull away the door opening seal, and remove the driver’s kick panel. 5. Lower the steering wheel, and apply masking tape as shown.
6. Turn the steering wheel 90° clockwise. Using a plastic trim tool, release the two hooks. 7. Turn the steering wheel 180° counterclockwise. Using a plastic trim tool, release the two hooks. 8. Release the upper column cover, and secure it to the dashboard with masking tape. 9. Remove the self-tapping screw from the lower column cover. 10. Turn the steering wheel 180° clockwise, and remove the self-tapping screw from the lower column cover. 11. Remove the lower column cover.