Download 2019 Honda Insight Moonroof Visor Installation Instructions – 1. Clean and wax the area to be covered with a
high-quality paste wax. 2. Open the moonroof. Roll up two shop towels, and insert them between the roof panel and air deflector to lower the air deflector. NOTE: Be careful not to damage the air deflector. 3. Measure and make two marks on the roof panel at the measurements shown. 4. Using an alcohol swab, clean the roof panel at each of the two marks you have made, but do not wipe off the marks.
5. Remove the adhesive backing from two of the protective films, and attach them to the roof panel at the two marks you made. 6. Locate the third indentation from the side of the moonroof opening. Using an alcohol swab, clean the roof panel where the protective film will attach. 7. Remove the adhesive backing from the two protective films, and attach them to the roof panel at the third indentation. 8. Place the left and right brackets “B” into position over the two protective films and around the lip of the roof panel, and tape them into position with masking tape.