Download 2019 Honda Odyssey Automatic Day/Night Mirror Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery. 2. Remove the roof console: • Using a small flat-tip screwdriver wrapped with a shop towel, pry out and remove the left and right lenses. • Open the sunglass holder and remove the four screws. • Remove the roof console and unplug the vehicle connectors.
3. Using a plastic trim tool, remove the camera cover lid. 4. Remove the camera cover. 5. Loosen the TORX screw, and remove the rearview mirror. 6. Install the automatic day/night mirror on the mirror mount as shown, and tighten the TORX screw. 7. Remove the tape to free the vehicle 7-pin connector. 8. Attach masking tape to the vehicle harness at the measurement shown. 9. Route the vehicle harness as shown. Be careful not to crease the headliner.