Download 2019 Honda Odyssey Chrome Door Trim Installation Instructions – 1. Open the left front door. Using one alcohol swab, thoroughly clean the left front door where the left front trim will attach. 2. Peel back the adhesive backings, and tape them to the front surface of the left front trim with masking tape. Remove the other adhesive backings. 3. Line up the left front door trim as shown. 4. While applying light pressure against the left front trim, carefully remove the taped adhesive backings.
5. Secure the left front trim to the left front door with two clips. 6. Using a rubber roller, apply firm pressure against the left front trim and roll from one end to the other. Apply firm pressure, especially at the ends. 7. Line up and apply masking tape to the upper edge of the left front trim as shown. 8. Using a utility knife, cut the masking tape between the left front and sliding doors. Be careful not to damage the paint. 9. Open the left sliding door. Using one alcohol swab, thoroughly clean the left sliding door where the left rear trim will attach.