Download 2019 Honda Odyssey Door Edge Guards Installation Instructions – 1. Clean the areas to be covered. 2. Identify each door edge guard by holding it up to the door and matching its contour with the door edge. 3. Gently place the left front door edge guard on the left front door as shown. 4. Using a felt-tip pen, mark the sealant at the top and bottom ends of the left door edge guard. 5. Remove the left door edge guard. 6. Position the cutting edge of the seam sealant cutting tool against the door edge, and carefully trim the seam sealant from mark to mark.
The cutting tool cuts in only one direction. 7. Apply touch-up paint to the cut seam sealant area, and let it dry thoroughly. 8. Position the left door edge guard on the left front door edge, and line up the marks. 9. Starting at the feature line, use a rubber mallet to tap the left door edge guard into position with a series of light taps, then work up and down. Make sure the position of the left door edge guard is correct. 10. Repeat steps 3 through 9 to install the right door edge guard.