Download 2019 Honda Odyssey Heated Steering Wheel Installation Instructions – 1. Turn the steering wheel so the front wheels are in the straight-ahead position. 2. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery, and wait at least 3 minutes before you start to install the steering wheel. 3. Pull away the door opening seal, and remove the driver’s dashboard side lid.
4. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors. 5. Lower and pull out the steering wheel as shown, and remove two TORX bolts. 6. Unplug the vehicle connectors. NOTE: Be careful not to damage the vehicle connectors. 7. Remove the airbag. Do not drop the removed airbag or hit it on an object. Place the removed airbag in a safe place with the pad surface (top) facing upward. 8. With the front wheels aligned in the straight ahead position, unplug the vehicle connector from the cable reel, and loosen the steering wheel bolt.