Download 2019 Honda Passport 20-inch Aluminum Wheel Installation Instructions – 1. Before installing the tire pressure sensor, clean the mating surface on the sensor and the aluminum wheel. 2. Install the tire pressure sensor and the washer on the aluminum wheel, and tighten the valve nut by hand. Make sure the pressure sensor is resting on the wheel. 3. While holding the tire pressure sensor against the wheel, tighten the valve nut to the specified torque.
Tightening torque: 5.9 lb-ft (8.0 N·m) 4. Install the tires according to the instructions in the Service Manual. 5.Install the wheels on the vehicle and torque to 94 lb-ft (127 N·m). 6. Drive the vehicle for at least 40 seconds at a speed of 15 mph (24 km/h) or more, and all sensor IDs will be memorized automatically. USE AND CARE • Use a neutral detergent to clean the wheels. • Rinse off the neutral detergent promptly after cleaning the wheels.